Universal Oil Cooler Kit Mishimoto 19 Rows with Thermostat / Black

Options:
silver or black, without thermostat
silver or black, with thermostat

Category: Oil Cooler Kits and Accessories

Rows: 19
Torque recommendation for installation:
20-33N*M is recommended for all straight fittings and ring eyes. Do not exceed the maximum range of 47N*M.

Danger:
It is the installer's responsibility to check all plugs, studs, clamps, fittings, and all other connections to ensure they are properly tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after an installation.
Total height: 330mm
Total length: 140mm
Total width: 51mm
Net length: 286mm
Net height: 140mm
Net dimensions: 286 x 140 x 51mm
Dash connectors:
No Dash = M20 x 1.5 -- M20 x 1.5 2 Dash = 3/4" -16UNF -- 3/4" -16UNF
Coated hose: 1.23m & 1.44m
Fitting coated hose: -10AN
Fitting Sandwich Plate: -10AN

Purchase includes:
(1) 19 rows of oil cooler
(1) 1.44m stainless steel braided hose with -10AN fittings
-- One straight fitting and one 90° swivel fitting
(1) 1.23m stainless steel braided hose with -10AN fittings
-- One straight fitting and one 90° swivel fitting
(1) M20 sandwich plate with thermostat (also available without thermostat)
(2) -10AN fittings
(2) Dowty oil seal (special washer and seal combination)
(1) Large O-ring
(2) 1/8" NPT Allen screw
(2) Sandwich plate adapters

Proper oil temperature control is key to maintaining and extending the life of your unmodified vehicle or high-performance engine. Keep oil temperatures in range with the universal Mishimoto Oil Cooler Kit. This kit is usable with most vehicles and contains all the key components for reducing oil temperatures and providing extra protection for your engine from oil degradation.

This kit includes a machined anodized aluminum sandwich plate with either a thermostat or without one. The optional Mishimoto thermostat on the sandwich plate provides additional temperature control and limits oil flow to the cooler when the optimum temperature is reached, making it perfect for those in cooler climates. The included mesh is our proven 19 row stacked plate cooler that can withstand high fluid pressures and significantly reduce oil temperatures with minimal pressure drop. This kit includes both -16 and M20-1.5 sandwich plate adapters to fit most makes and models. Also included in this kit are pre-assembled stainless steel braided oil lines with -10AN fittings and Dowty gaskets for a durable, leak free connection. The Mishimoto universal oil cooler kit supports you with the efficiency you need to be on the street and track and stay out of the shop.